
Classifications of Filler Masterbatch
Traditionally, most fillers were considered as a child category of additives because they affect nothing or even decrease the strength of the polymer. Their main
Traditionally, most fillers were considered as a child category of additives because they affect nothing or even decrease the strength of the polymer. Their main
The part becomes more rigid as it cools in the mold. Even an essentially rigid material might be successfully ejected from the mold if this
There are 4 principle elements to a successful plastic product: material selection, part design, tooling, and processing. Typically, product designers are effective part designers but
Antioxidants are used in a variety of resins to prevent oxidative degradation. Degradation is initiated by the action of highly reactive free radicals caused by
Anti-blocking agents roughen the surface of the film to create a spacing effect. Self-adhesion is an undesirable situation when using LLDPE and LDPE film. Anti-blocking
Flame retardants are in a unique position among plastics additives in that they are both created by regulations and yet are threatened by other regulations.
GET A QUOTE & FREE SAMPLE
No Strings Attached - No Shipping Costs - Limited Offers